Locating and testing radio filaments for faulty sets
The article explains how radio owners, builders or buyers can diagnose filament issues. It covers testing with the B battery disconnected and using a lamp or voltmeter to check voltages at the battery and A terminals, diagnosing open filament wiring and poor contacts, and suggests lamps or 6V/4V substitutes to gauge filament light and current draw.
Remedies for regenerative detector radio faults explained
A detailed guide to locating and fixing faults in regenerative detectors. It covers wiring tests with a simple tester, battery checks, tube aging, and methods to verify plate grid and plate circuits. It explains adjusting tickler coupling, testing with conductors or condensers, and practical steps to isolate open circuits.
MENTIONED IN THIS ARTICLE
O. K
Simple Auxiliary Receiver for HE Radio Set Aids
A compact regenerative single-tube auxiliary radio set is described as an easy to build unit with low cost and minimal maintenance. It uses a 14 turn primary and 48 turn secondary coil, a small high quality condenser, a rheostat, and four binding posts to provide strong tuning with reduced battery use and simple operation.
MENTIONED IN THIS ARTICLE
WNERS
Froma
Tuning and assembly tips for a shortwave receiver
The article explains fitting denser vernier attachments for sharp tuning, locating DX stations between squeals, and adjusting filament rheostat to control regeneration. It suggests cabinet options, portable design with detachable front, and installing small C and 22½ volt B batteries in the cabinet. It also advises using an open aerial rather than a loop.
New Long Distance Crystal Promises Clear Reception
Inventor Mr. Hick promotes a distant crystal praised for clear station reception and no hunting spots. The offer includes two crystals for $1, with one to keep and one to try on another set, refundable if not satisfied.
MENTIONED IN THIS ARTICLE
Hick
Also Mentioned on This Page
A. V. Loughren
Sigtry
Kenneth M. Swezey
Vernier